Welcome to "NetComDirect" the best place for you to find great prices on notebook and desktop internal or external hard drives, dvd-roms, dvd-rams, cd-rws, tape media, dvd-ram media, cable and SCSI adapters, software and more, much more...
 

 


Home |  Contact Info | Terms & Conditions | Tech Support | FAQ's | Forms | Place an Order | Show Orders | Customer Testimonials

What time is it, in your country?

   


Click to enlarge

Toshiba MK4050GAC 40GB ATAPI-IDE 2.5in 4200RPM Hard Drive (HDD2G13 / MK4050GACY / MK4050GACE)




Description:

Toshiba Storage Device Division continues to reinforce its leadership by introducing its next generation of automotive hard disk drive MK8050GAC. The new drive have been especially designed through extensive work together with leading head-unit manufacturers. These drives are made primarily for the demanding automotive environment and will be integrated into the worlds most prestigious motor vehicles. Due to the increasing demand for 3D navigation, entertainment and on-demand information being offered in automobiles, Toshiba hard disk drives enable the increasing amount of data to be stored safely.

The 40GB hard disk drives can endure extreme operating conditions in the automotive environment at altitudes of -300m to 5.500 meters. They are dependable in wide temperature zones from sub-freezing to extreme heat (-30 to 85 operating / -40 to 95 non-operating) whilst the spindle motor runs at 4,200 rpm. In addition, the MK4050GAC can withstand operational shock of up to 300g and non-operational shock of 800g, providing a rugged and dependable option for cars as they travel through mountainous and rocky terrains across the globe. Toshiba is dedicated to being the best hard disk drive supplier to the automotive industry. Today, Toshiba Storage Device Division is the preferred automotive hard disk drive supplier with a worldwide market share of 75% and over 7 million delivered automotive grade hard disk drives sold.



Features:

  • Temperature range: -30C to +85C
  • Low Power Consumption
  • Parallel ATA (PATA) Interface


Specifications:


MODEL MK4050GAC
FEATURES
Part number HDD2G13
Formatted capacity 40,008 MByte
Form factor 2.5 inch
Interface type ATAPI/IDE
Supported interface standards ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7
Head/actuator technology "Ramp-Load" Technology PMR (Write)/TMR (Read)
Shock detection Shock sensor circuit
S.M.A.R.T. The SMART command set is supported.
PHYSICAL PARAMETERS
Number of platters 1
Number of heads 2
ACCESS TIMES
Average seek time 16 ms
Maximum seek time 28 ms
Track-to-track seek time 3 ms
TRANSFER RATES
Internal From 237.4 MBit/s to 318.7 MBit/s
PIO mode (Host) PIO mode 4 (16.6 MByte/s)
UDMA mode (Host) UDMA mode 5 (100 MByte/s)
ROTATIONAL SPEED
Rotational speed 4,200 rpm
BUFFER
Buffer size 8,192 kByte
Cache Read-ahead cache Write cache
REACTION TIMES
Start time, typical (Up to Drive Ready) 2 s
Start time, maximum (Up to Drive Ready) 10 s
Recovery time (from stand-by, typical) 2 s
Recovery time (from stand-by, maximum) 10 s
RELIABILITY SPECIFICATIONS
Seek error rate 1 error per 10^6 seeks
Non-recoverable error rate 1 error per 10^13 seeks
Usage conditions Less than 3,000 operating hours at -30C to 85C Hours
Preventive maintenance No preventive maintenance is required
POWER CONSUMPTION
Start (Maximum) 6.5 (-30C to -20C)
5.5 (-20C to 85C) W
Seek (Average) 2.3 W
Read (Average) 2.0 W
Write (Average) 2.0 W
Low-power idle (Average) 0.8 W
Sleep (Average) 0.1 W
Stand-by (Average) 0.25 W
POWER SUPPLY MOTOR
Supply voltage +5 V (+/- 5 %)
Allowable noise/ripple Max. 100 mV
POWER SUPPLY LOGIC
Supply voltage +5 V (+/- 5 %)
Allowable noise/ripple Max. 100 mV
MECHANICAL SPECIFICATIONS
Drive width 69.85 mm
Drive height 9.5 mm
Drive depth 100 mm
Drive weight 0.096 kg
Drive orientation The drive can be installed in all axes (6 directions)
Mounting instructions (Screwing) Four screws should be tightened equally with 0.39 Nm torque. The depth should be 3.0 mm minimum and 3.5 mm maximum
TEMPERATURE
Operating From -30 C to 85 C
Non-operating From -40 C to 95 C
Shipping From -40 C to 95 C
HUMIDITY
Operating From 5 % to 90 %
Non-operating From 5 % to 95 %
Shipping From 5 % to 95 %
VIBRATION
Operating (Maximum) 3 G, with 5 - 50 Hz
2 G, with 50 - 200 Hz
1 G, with 200 - 500 Hz
Non-operating (Maximum) 5 G, with 10 - 500 Hz
SHOCK
Operating (Maximum) 300 G, with 2 ms half sine wave
Non-operating (Maximum) 800 G, with 1 ms half sine wave
Shipping (Maximum) 0.7 m free drop with no unrecoverable error. Drive must be packed in Toshibas original shipping package. Apply shock in each direction of the drives three mutually perpendicular axes, one axis at a time.
ALTITUDE
Operating From -300 m to 5,500 m
Non-operating From -300 m to 12,000 m
ACOUSTIC NOISE
Idle mode (Disk spinning) Max. 22 dB
Random seek Max. 26 dB
BIOS SPECIFICATIONS
Number of cylinders (Logical) 16,383
Number of heads (Logical) 16
Number of sectors/track (Logical) 63



Product Content:


  • Toshiba MK4050GAC 40GB ATAPI-IDE 2.5in 4200RPM Hard Drive (HDD2G13 / MK4050GACY / MK4050GACE)
    - SOFTWARE NOT INCLUDED -

Before you purchase this item, please ensure that you have verified compatibility with system by visiting the manufacturer's web site.
We assume no responsibility and will not accept full refunds for items purchased that are not compatible with your system configuration
.



Conditions:





Warranty:


  • 30 Day



Availability: Contact us for availability

Toshiba MK4050GAC 40GB ATAPI-IDE 2.5in 4200RPM Hard Drive (HDD2G13 / MK4050GACY / MK4050GACE)
MK4050GAC
HACKER SAFE certified sites prevent over 99.9% of hacker crime.



Pay us securely with any major credit card through PayPal Domestic & International!
Follow this PayPal Order Proceadures - NOTE: Customer's that use PayPal to make payment, please add 6% of your total to your total for processing fees, without this fee, your order may/will be placed on hold/cancelled or the shipping will be downgraded
Visa MasterCard



Copyright & Trademark Statement.
All rights reserved. Copyright 2001-2013.